※Debian 4.0で取ってます。
■CPU Info
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 67
model name : Dual-Core AMD Opteron(tm) Processor 1210
stepping : 3
cpu MHz : 1800.210
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy
bogomips : 3604.13
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 67
model name : Dual-Core AMD Opteron(tm) Processor 1210
stepping : 3
cpu MHz : 1800.210
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy
bogomips : 3600.00
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
■姫野ベンチ
mimax = 65 mjmax = 65 mkmax = 129
imax = 64 jmax = 64 kmax =128
Start rehearsal measurement process.
Measure the performance in 3 times.
MFLOPS: 678.902939 time(s): 0.072769 3.288628e-03
Now, start the actual measurement process.
The loop will be excuted in 2473 times
This will take about one minute.
Wait for a while
Loop executed for 2473 times
Gosa : 4.760609e-05
MFLOPS measured : 701.554306 cpu : 58.049123
Score based on Pentium III 600MHz : 8.555540
topコマンドでモニタしてたけどCPUは50%以上にならない。
コア2個あっても片方のみで処理してる感じ('～')
Kernelの問題かな・・・
デフォルトで付いている80G単発 Memory ECC 1G
■DISK I/O(READ)
Timing buffered disk reads: 216 MB in 3.03 seconds = 71.38 MB/sec
Timing buffered disk reads: 216 MB in 3.03 seconds = 71.35 MB/sec
Timing buffered disk reads: 214 MB in 3.00 seconds = 71.32 MB/sec
Timing buffered disk reads: 216 MB in 3.02 seconds = 71.42 MB/sec
Timing buffered disk reads: 216 MB in 3.02 seconds = 71.51 MB/sec
■DISK I/O(WRIGHT)
1073741824 bytes (1.1 GB) copied, 22.0389 seconds, 48.7 MB/s
1073741824 bytes (1.1 GB) copied, 25.4704 seconds, 42.2 MB/s
1073741824 bytes (1.1 GB) copied, 22.3182 seconds, 48.1 MB/s
1073741824 bytes (1.1 GB) copied, 21.8869 seconds, 49.1 MB/s
1073741824 bytes (1.1 GB) copied, 33.7336 seconds, 31.8 MB/s
HDT72101SLA360
1TB*2 (SoftRAID 1) Memory non-ECC 4G
■DISK I/O(READ)
/dev/md2:
Timing buffered disk reads: 266 MB in 3.02 seconds = 87.95 MB/sec
Timing buffered disk reads: 274 MB in 3.02 seconds = 90.62 MB/sec
Timing buffered disk reads: 280 MB in 3.01 seconds = 92.91 MB/sec
Timing buffered disk reads: 278 MB in 3.00 seconds = 92.55 MB/sec
Timing buffered disk reads: 262 MB in 3.01 seconds = 86.97 MB/sec
■DISK I/O(WRIGHT)
1073741824 bytes (1.1 GB) copied, 7.41583 seconds, 145 MB/s
1073741824 bytes (1.1 GB) copied, 7.63369 seconds, 141 MB/s
1073741824 bytes (1.1 GB) copied, 7.40461 seconds, 145 MB/s
1073741824 bytes (1.1 GB) copied, 7.18999 seconds, 149 MB/s
1073741824 bytes (1.1 GB) copied, 8.31548 seconds, 129 MB/s
■Super π (Opteron1210 Mem 2G*2)
Parameter(%i) to super_pi is missing. Parameter value ? 20
Start of PI calculation up to 1048576 decimal digits
End of initialization. Time= 0.916 Sec.
I= 1 L= 0 Time= 1.612 Sec.
I= 2 L= 0 Time= 1.788 Sec.
I= 3 L= 1 Time= 1.804 Sec.
I= 4 L= 2 Time= 1.792 Sec.
I= 5 L= 5 Time= 1.788 Sec.
I= 6 L= 10 Time= 1.796 Sec.
I= 7 L= 21 Time= 1.792 Sec.
I= 8 L= 43 Time= 1.792 Sec.
I= 9 L= 87 Time= 1.788 Sec.
I=10 L= 174 Time= 1.792 Sec.
I=11 L= 349 Time= 1.792 Sec.
I=12 L= 698 Time= 1.784 Sec.
I=13 L= 1396 Time= 1.784 Sec.
I=14 L= 2794 Time= 1.796 Sec.
I=15 L= 5588 Time= 1.780 Sec.
I=16 L= 11176 Time= 1.772 Sec.
I=17 L= 22353 Time= 1.768 Sec.
I=18 L= 44707 Time= 1.696 Sec.
I=19 L= 89415 Time= 1.588 Sec.
End of main loop
End of calculation. Time= 35.846 Sec.
End of data output. Time= 0.192 Sec.
Total calculation(I/O) time= 36.038( 1.116) Sec.